Guide · Des Moines, IA
Why concrete driveways crack and spall in Iowa
Updated November 2026
Concrete doesn’t fail randomly. Each kind of damage points to a cause, and most causes are decided on the day it’s poured.
Short answer
Most driveway damage in Iowa traces back to water. Water in or under the slab freezes and expands, de-icing salts increase the number of freeze-thaw cycles at the surface, clay soil moves as it wets and dries, and a thin or poorly compacted base lets slabs settle. The defenses are a compacted granular base, air-entrained concrete at the right thickness, properly spaced control joints, good curing, sealing and drainage that sends water away.
What the damage tells you
- Surface flaking (scaling or spalling): freeze-thaw and salt on concrete that was weak at the surface, often from finishing with too much water or poor curing.
- Random cracks: missing or shallow control joints, or shrinkage.
- Sunken or tilted panels: base settlement, washout or poor compaction.
- Heaving: frost or tree roots lifting slabs.
What a good pour includes
- Old concrete removed and the subgrade corrected
- Compacted granular base
- Air-entrained mix suited to freeze-thaw exposure
- Thickness matched to the vehicles using it
- Control joints at proper spacing and depth
- Proper curing, then sealing
- Slope that drains away from the garage and house
Want a real number for your concrete project? We call back within one business day, usually sooner.
Call (515) 762-6821Leave a message with your name, number and project. We call back within one business day.
Questions to ask before you sign
Ask for the base depth, slab thickness, mix and air entrainment, reinforcement, joint layout, curing method and who handles the approach permit. If those aren’t in the written estimate, ask for them to be added.
Questions
Does rebar or mesh prevent cracks?
Reinforcement helps hold cracks tight and keeps panels aligned, but it doesn’t stop concrete from cracking. Joints and base do most of the prevention.
Can spalled concrete be fixed?
Light scaling can sometimes be resurfaced. Deep or widespread spalling usually means replacing the affected panels.